To find the parts that fit your machine, click on the link below and select your make, year and model.
Only the products that fit your machine will be shown in the product list
Click Here to Add Your Machine! >>
EBC XC-Series Contour Rotors. The steel used in the EBC X and XC rotor blades is a special stainless steel blend that boasts up to a 10% improvement in friction effect, over that of normal heat-treated stainless steel found in stock rotors. They also boast up to a 5-10% reduction in total weight, by using a 6 only button drive system on a lightweight alloy center hub. The SD-System™ uses square sided buttons and rivets so that the rotor can expand inwards and outwards, unrestrained and so that rotor functionality is retained at any speed or load; this extends the lifetime of the rotor and prevents distortion failures. Keeping the rotor blade true and flat throughout its life cycle, allows a 5-10 times longer life, compared to a conventional rotor built with circular buttons. Technically, the only reason for replacement would be impact damage, wear over a very extended number of miles and rotor wear
(based on 7 reviews)
of respondents would recommend this to a friend.
Reviewed by 7 customers
Displaying reviews 1-4
Back to top
Previous | Next »
(1 of 1 customers found this review helpful)
heavier than stock rotor
See all my reviews
Comments about EBC XC-Series Contour Rotors:
This looks like a very good rotor. Is thicker than the stock unit so should last longer. It fit perfectly. Is winter, so have not used it on the road yet. In general, have had very good luck with ebc products,
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Works as advertised
By Returning CBR600 Owner
from St Charles, MO
Installed these on a '99 CBR600F4 I recently purchased. Product works as advertised, at least so far. I'm still in the break in period. Nice to have reliable & predictable brakes again. Much cheaper than oem especially if you're an AMA member.
The Jury is still out
from El Paso, TX
Both of my stock rotors where warped, not sure how that happened, but at 43K miles there were depth ridges forming between disc swept area and non-swept area; they were getting thinner in other words. OEM prices outrageous. so EBC seemed to be a well priced alternative. I put these on my C-14 and followed the break in procedures given by EBC. The braking power is the same as stock but I am experiencing a shudder just before the bike stops completely, maybe a half rotation of the wheel. I can live with it, but wonder why it does it. There is no pulsing just that last millisecond shudder. I thought it might be part of the bedding in process but to date and with over 600 miles on the rotors it appears that it'll be there forever. Otherwise they feel great in all stopping/slowing situations, no different than the stock discs' and so much more affordable.
This is a great product.
from Ontario Canada
This is a great product, Bike Bandit shipped to me so fast I was shocked!! great service, you have won over a new customer.Their price and service can't be beat.
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Know the answer? Answer this question
Do you have a question about this product?
Specifications and Options