To find the parts that fit your machine, click on the link below and select your make, year and model.
Only the products that fit your machine will be shown in the product list
Click Here to Add Your Machine! >>
UNI's Crankcase Breather Filter has been laboratory proven to be more efficient than paper filters. No oil or special cleaners are needed, because this filter is completely washable and durable. Features: -Includes exclusive "Ziptie Loop" for mounting to the frame - no loose hoses. -Guaranteed against defects in material and workmanship.
(based on 6 reviews)
of respondents would recommend this to a friend.
Reviewed by 6 customers
Displaying reviews 1-4
Back to top
Previous | Next »
Good product, highly recommended.
from Pipe Creek, TX
See all my reviews
Comments about UNI Crankcase Breather Filter:
This breather filter was for my Suzuki Savage crankcase breather hose. The filter is compact and well made. The fact that it flexes a little gave me some needed "wiggle room" for a tight installation. Good stuff as usual, from Bike Bandit.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
from Winnipeg, MB
Bought this to catch oil etc leaving the breather and to prevent anything from entering after I removed the stock airbox from my 79 GS850. It was a snap to install and the style matches the pod filters I replaced my airbox with. It would be nice if it were chrome and the same colour as my pods, but the red isn't too bad.How I chose the size and style: I wanted to push this into the end of the hose that ran from my breather to my airbox so I bought the "push in" style. (If I wanted to clamp it onto the breather nipple of my valve cover, I would have ordered the "clamp on" style).The lip on my airbox attachment was 1/2" and the I.D. of my breather hose was 7/16". I ordered the 1/2" filter. With a bit of encouragement, the filter pushed into the hose and sat snugly. Then I just tightened up the hose clamp and used the enclosed zip tie to snug it up to the airbox mounting tab.It probably took 10 minutes from the time I opened the package to the time I snugged up the zip tie AND I had to remove the gas tank bolt to get a little bit of finger room to work.
Filter looks like it came with the bike.
It fit perfect.
(2 of 2 customers found this review helpful)
from Fort Irwin, CA
Alright, here's the 411 on how to size these things, I think.I called and asked online as to what size filter I would need for a hose with the I.D. of 1/2", I got two different answers, so I took a chance and ordered the filter with the black rubber connection.It's I.D. was 1/2" not it's outside Diameter as explained in another review. This being said, filters with the white connection outside diameter is 1/2". So if you are looking to get a bargain on mini universal filters, make sure you buy the right one for your prodject. Measurement of "white" end filters is outside diameter, "black" end filters measurement is inside diameter.
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Know the answer? Answer this question
Do you have a question about this product?
Specifications and Options