Specifications and Options
(based on 2 reviews)
Reviewed by 2 customers
Displaying reviews 1-2
Back to top
Needs more specific details
See all my reviews
Comments about K&L Valve Stem:
would be nice if the dimensions were more specific,installed 90degree 10 mil.in my '04 BMW R1150 GS.The stem that installs into the rim were too long,I had to turn the nut upside down so it would tighten,they don't leak so I guess its OK but I would've liked to have more info before buying them.They do make it easier to check the tire pressure.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
(4 of 4 customers found this review helpful)
90 degree threads too short
Decent industrial look and very light, but the bandits don't list the length of the threaded portion of the stem. I got the 90 degree version and it fit the hole, but didn't extend far enough into the rim to get the nut onto the other end. This was an early 80's Kawasaki mag wheel, so it may fit newer or different types of wheels, but it sure would be nice if the bandits actually took and listed measurements, particularly for customizers. The 8mm 90 degree valve stem specs: threaded stem that extends into the rim is 7.67mm (8mm) wide, and 12mm "short" (11 if you count the included O-ring). The arm with the valve core in it extends about 30mm out from the center of the hole in your rim, and sits about 14mm high, and the base is 15mm wide, for anyone who wants to know!
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Know the answer? Answer this question
Do you have a question about this product?