(based on 5 reviews)
of respondents would recommend this to a friend.
Reviewed by 5 customers
Displaying reviews 1-4
Back to top
Previous | Next »
fast shipping expected the worse
By Evolon co.
Comments about EBC SRK Series Complete Clutch Kit:
I expected the worse first time shopping with thks company googled co. And decided to trust it expected and expectations were met shipping came prompt right when I needed the most to get it going for the smakas ;) bike bandit is good in my books and im a big spender im about to buy more stuff annd turn up yeah turn doown for wha ! Bike bandit is tht blue magic order good products ! Mewling quims !
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
(2 of 2 customers found this review helpful)
Wrong Size Frictions
I bought this kit for a 96 GSXR 750. Since this was a brand new kit, I did not measure the frictions,steels or springs. I installed the kit and rode my bike to work the following day and it was slipping so bad I couldn't go more than 1/4 throttle. Got home, tore it down again and measured the frictions. The spec for nominal thickness is 2.92-3.08mm The brand new EBC frictions had an average thickness of 2.80!! I have been trying to get a hold of EBC to give them a chance to rectify their mistake and I'm not having much luck.
Bottom Line No, I would not recommend this to a friend
(4 of 5 customers found this review helpful)
from San Diego
The clutch discs are decent, and when I say decent I'm being generous. The clutch springs are the worst I've ever used. Not only are the thickness of the coils thinner than factory, but the springs are 3 mm shorter then the factory Springs after two days of riding on the clinch I was slipping all over place. I'm only spending the time to write this because I don't want someone else to waste their money on this product it is the worst clutch kit I have ever purchased and I have been riding and racing for 10 years
(5 of 5 customers found this review helpful)
See all my reviews
put it on my '05 cbr600 RR after my clutch was slipping. Feels great, the heavier springs make going from 1st to 2ed that extra grab and pull. Has larger friction plate surface area. i would say about 30% larger. Do it yourself, took about 5 mins to replace the clutch... about 30 mins just taking out screws. Not hard what so ever. very easy install
Specifications and Options
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Know the answer? Answer this question
Do you have a question about this product?