Specifications and Options
(based on 17 reviews)
of respondents would recommend this to a friend.
Reviewed by 17 customers
Displaying reviews 1-4
Back to top
Previous | Next »
I would buy them again
from Downingtown, PA
Comments about EBC CSK Clutch Spring Kit:
They do exactly what they're supposed to do; stiffen the clutch a bit...but these are NOT a "quick fix" for a clutch that needs to be replaced.When I installed them I noticed my clutch could need replacing due to the smell and texture of the plates but they did get my stock clutch a little more snap. NOTE: when replacing the springs, DO NOT over torque the bolts...I snapped one off in my clutch hub and had a hell of a time drilling it out and extracting it...torque until they stop and just a half click more (9lbs of torque I believe)
Bottom Line Yes, I would recommend this to a friend
Images shared by Kaspbrochill
4 of 5 installed + broken bolt
Stock springs vs new EBC's
Was this review helpful? Yes / No
- You may also flag this review
Better then OEM
from Tempe, AZ
See all my reviews
Bought to replace stock springs after noticing some slippage into 2nd and 3rd gear at all speeds, made me look like a noob. On my way home after installing beat a Mustang Gt at a light. It's been a week since I installed them and have not felt any slippage at any speed.
Not a Prob
from Huntsville, TX
Great replacement for the O.E.M counterpart. bolted right up and was ready to go.
(0 of 2 customers found this review helpful)
By El Sepu
Just the facts here: I bought these because I had to do so some repairs in the trans, and figured may as well change some clutch parts, like the springs. I ordered these because they were cheaper than factory + "improved design"I completed the repairs I had to do, reinstalled the clutch boss and the fiction discs, etc, and as I am assembling these springs trying to get them to the factory setting of 8 N/m of torque I hear a snap... I figure this is just the spring settling... another snap... Ok, I disassemble everything, and notice the bottom of the spring seats in the pressure plate are cracked and broken off. GRRRRR!!!!So I figure old clutch boss + new stiffer springs = too much for the press plate to take. That I get. But the problem is that these aftermarket parts did not warn me about this. Neither stated to possibly change the torque to a lower setting. So, I reordered the boss, pressure plate and FACTORY springs... Just an extra $188 I did not want to spend. I do not want to take a chance again so I got factory springs.In short, my "savings" of ~$40 turned into an expense of almost $200... I will drop EBC to the bottom of my list of aftermarket choices from now on.
Bottom Line No, I would not recommend this to a friend
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Know the answer? Answer this question
Do you have a question about this product?