To find the parts that fit your machine, click on the link below and select your make, year and model.
Only the products that fit your machine will be shown in the product list
Click Here to Add Your Machine! >>
Features -Always fit new springs which get tired after miles of heat and use -EBC spring kits are 10% stiffer than standard and are sold in engine sets -Lever will feel slightly heavier when uprating springs, test ride to adjust to difference
(based on 10 reviews)
of respondents would recommend this to a friend.
Reviewed by 10 customers
Displaying reviews 1-4
Back to top
Previous | Next »
(3 of 3 customers found this review helpful)
from cdub, MI
Comments about EBC CSK Clutch Spring Kit:
I love them!!!!!!
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Some Good Springs
from BC Canada
See all my reviews
Bought a set for my 1984 Honda XR100. I was surprised when I compared the new to the old springs which I took out of the clutch assembly. The new springs were shorter than the old ones, around 1 millimeter. But by comparing the old and new springs by a squeeze with my hand the new ones definitely provide a higher tension.The new springs are working fine, and you can tell there's a fair amount of extra tension when you pull the clutch lever. Even though they're slightly shorter, the extra tensions seems to more than make up for the bit of missing length.
By Mr fix it
works great, will cause a harder lever pull but was worth it to have solid clutch engagement
(0 of 1 customers found this review helpful)
from Houston, TX
After installing these clutch springs I spent about an hour and a half trying to figure out why my clutch lever wouldn't move. I took the clutch cover off, examined the springs, but could not see where I'd gone wrong. Eventually I reinstalled the original springs that I'd taken out, once again bolted on the clutch cover, and I then could get the clutch lever to move. A side by side examination of the original clutch spring and the EBC replacement showed that the EBC spring is made of much heavier material. The EBC springs are so thick they were fully compressed when installed. These springs are NOT made for my motorcycle. The EBC documentation may say otherwise, but the proof is in the fact that they could not be made to work.
Bottom Line No, I would not recommend this to a friend
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Know the answer? Answer this question
Do you have a question about this product?
Specifications and Options