To find the parts that fit your machine, click on the link below and select your make, year and model.
Only the products that fit your machine will be shown in the product list
Click Here to Add Your Machine! >>
ElectroSport regulator/rectifiers are designed to be direct replacements to original equipment by using stock mounting locations and OEM style connectors
(based on 50 reviews)
of respondents would recommend this to a friend.
Reviewed by 50 customers
Displaying reviews 1-4
Back to top
Previous | Next »
(2 of 3 customers found this review helpful)
Larger width than original OEM
By Buster Brown
from Wooster, Ohio
Comments about Electrosport Industries Rectifier/Regulator:
Purchased for 83' cb450sc Nighthawk. Wire connectors match. Original regulator measoures 3.125" wide - This one measures 3.75" wide. Slotted bolt holes line up with bracket ok, but had to bend mounting bracket towards front of bike (but stil be able to snap side cover on). Had to grind off about 3/16" of ear on bike frame (that bracket bolts into) to allow clearance. Had to weld extension (used 1/2" lock-washer) on bracket to remount bracket to frame. It restored voltage back to where it should be.
Bottom Line No, I would not recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
(1 of 1 customers found this review helpful)
Worked on my SV650
from Kokomo indiana
See all my reviews
This regulator/rectifier fit perfectly on my SV650 (2000 model with 82,000 miles). I had to use longer bolts because it is a little thicker at the connection point (overall thickness was the same). The connectors were an exact match. Installation was a snap since I luckily had the bolts required on hand. I can't comment on longevity because I just installed it but all tests are perfect (14.5 volts at 5000 rpm) and it looks like a quality part.
Bottom Line Yes, I would recommend this to a friend
(1 of 2 customers found this review helpful)
just fitted, hope it lasts
from Litchfield NH
charging good right away,hope it last's
fast deilivery on parts and it was a plug in part did not have to modify any wires on my 97 cbr1100xx
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Know the answer? Answer this question
Do you have a question about this product?
Specifications and Options
Connect with Us