To find the parts that fit your machine, click on the link below and select your make, year and model.
Only the products that fit your machine will be shown in the product list
Click Here to Add Your Machine! >>
-Each kit contains float bowl gasket or float bowl O-ring, float needle or float valve assembly and O-rings to rebuild one O.E.M. Carburetor body.
(based on 10 reviews)
of respondents would recommend this to a friend.
Reviewed by 10 customers
Displaying reviews 1-4
Back to top
Previous | Next »
(6 of 6 customers found this review helpful)
from Central Nebraska
Comments about K&L Economy Carburetor Repair Kit:
I found this kit to be more superior than some of the other carb kits found elsewhere. O rings are of top quality and fit!!! got the old Kawii runnig smooth as new!!
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
(2 of 2 customers found this review helpful)
Everything fit but definitely "economy"
from Northern Virginia
About Me Auto Enthusiast
I used this product to rebuild the carbs on a 1985 Honda Sabre. This was definitely the cheapest way to go compared to OEM parts. All seals, screws, O-rings fit well. The complaint I had was with the thickness and hardness of some of the brass parts. The needle valve seat seal was much thinner and softer than the original. When I tightened down the seat it tore the seals up. I didn't realize this till I put the bike back together and got fuel flowing past the seat into the cylinder which caused hydraulic lock. I replaced the needle valve seat seals with the original ones I had kept and cleaned up. They are about twice as thick as the ones in this kit.Also, the brass idle valve is very soft and easily marred with a screwdriver. The rubber parts worked great to this day.
(1 of 1 customers found this review helpful)
I would by this kit again.
By Richie R
from Northern WI
The carb kit works great,got the old shadow running.
Value kit with no hassle
By Jumpster Jones
from Houston, TX
See all my reviews
Drop in component that is easy to use. Everything fit perfectly in my 99 Katana. Not that the brass insert is much softer than the OEM component. This won't affect performance, but I suspect it will cause problems down the line if it needs to be removed. Keep your OEM insert if you can and you get the best of both worlds!
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Know the answer? Answer this question
Do you have a question about this product?
Specifications and Options