To find the parts that fit your machine, click on the link below and select your make, year and model.
Only the products that fit your machine will be shown in the product list
Click Here to Add Your Machine! >>
Made of lightweight aluminum for less weight. For use on most tubeless tire rims. Right-angle valve stem makes inflating tires on dual disc wheels easy. The angled valve stem is a direct 90° bend from the surface of the wheel rim.
(based on 1 review)
Reviewed by 1 customer
Displaying review 1
Back to top
(3 of 3 customers found this review helpful)
90 degree threads too short
Comments about K&L Valve Stem:
Decent industrial look and very light, but the bandits don't list the length of the threaded portion of the stem. I got the 90 degree version and it fit the hole, but didn't extend far enough into the rim to get the nut onto the other end. This was an early 80's Kawasaki mag wheel, so it may fit newer or different types of wheels, but it sure would be nice if the bandits actually took and listed measurements, particularly for customizers. The 8mm 90 degree valve stem specs: threaded stem that extends into the rim is 7.67mm (8mm) wide, and 12mm "short" (11 if you count the included O-ring). The arm with the valve core in it extends about 30mm out from the center of the hole in your rim, and sits about 14mm high, and the base is 15mm wide, for anyone who wants to know!
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Know the answer? Answer this question
Do you have a question about this product?
Specifications and Options
Connect with Us