To find the parts that fit your machine, click on the link below and select your make, year and model.
Only the products that fit your machine will be shown in the product list
Click Here to Add Your Machine! >>
Bikemaster 12-Blade Combination Tappet and Feeler Gauge Set. Blades: dual marked 0.203mm/0.008" to 0.660mm/0.026". 4" long taper blades, hardened and polished.
(based on 1 review)
Reviewed by 1 customer
Displaying review 1
Back to top
Decent feeler gauge
By XR Rebuilder
Comments about Bikemaster 12-Blade Combination Tappet and Feeler Gauge Set:
The bent feeler gauge is a good idea. I have purposely bent an old straight set of gauges in the past for setting the valve-rocker arm gap. I thought I would buy a set that already has a bend to see if it is any better than "my" set.The first thing I noticed is the choices and combinations of gauges are not what I need for every application. When it comes to checking smaller gaps I noticed that the new gauge was either too thin or too thick, so I used my old gauges. Also, the bent length is too long for my purposes. So, like I said above it is a good idea but could be improved upon.
Bottom Line No, I would not recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Specifications and Options