To find the parts that fit your machine, click on the link below and select your make, year and model.
Only the products that fit your machine will be shown in the product list
Click Here to Add Your Machine! >>
Motion Pro Chain Riveting Tool Replacement Pins. Designed to be used to push pins out for breaking chains.
(based on 5 reviews)
of respondents would recommend this to a friend.
Reviewed by 5 customers
Displaying reviews 1-4
Back to top
Previous | Next »
See all my reviews
Comments about Motion Pro Chain Riveting Tool Replacement Pins:
I bought this to replace the one that broke on me. It should work all right hopefully longer than the last.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
I bought replacement pins after the original pins broke the first time I used them. Of course, the replacements are no better than the original. I should have cut my losses and thrown the thing away. When I bought replacement pins, I also bought the Motion Pro heavy duty chain tool. Hopefully it will be better than this thing.
Service and delivery comments:
It is a good outfit. But they should not sell junk like the Motion Pro regular chain tool.
Bottom Line No, I would not recommend this to a friend
Yeah, they break but...
from Portland, OR
It's possible to use them without breaking them, it just took me a while to figure it out. Use a dremel and cut the outside of the chain pin you wish to remove off. Then when you use the chain breaker allow as little of the motion pro pin as possible to be sticking out of the tool before you begin driving it into your chain. Haven't broken a pin since I started doing this, but had some old broken ones to replace. Long story short, they work well, but with 500 series chains and larger grind or cut the outside of the chain pin first. Not surprising they break given the diameter of these things, but a bit frustrating none the less.
Excellent selection of parts, generally good pricing, freight can run high.
Not High Quality Steel
from Baltimore, Maryland, USA
I'm not a pro. I have one bike, and am replacing the chain for the 2nd time.The original kit costs around $100, and fortunately I broke the pin *after* the last link was removed - during my first chain replacement.The chain breaker replacement pin - what I'm reviewing here - lasted about as long. I had to remove two links, and it broke after the 2nd. So, I don't need one until the next chain replacement.But I'm a bit ticked that the tool breaks so easily. And this time I ground the rivets smooth with the plate before pressing them out.I noticed that Honda offers a chain breaker in my factory manual (for 90-96 VFR750, which is a 530 size chain). I think there are other mfrs out there. I suggest (if you're reading this) that you seek out reviews of the competition for a whole kit before buying.I'm not sure any other mfr's replacement pins would work, so I'm stuck buying another replacement pin.
Great, friendly service. I'm guessing that they all - or mostly all - ride, and want others to get the stuff they need/want.
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Know the answer? Answer this question
Do you have a question about this product?
Specifications and Options