To find the parts that fit your machine, click on the link below and select your make, year and model.
Only the products that fit your machine will be shown in the product list
Click Here to Add Your Machine! >>
Will work on most 2 and 4-stroke engines with vertically split cases Includes 6 and 8mm mounting bolts. Eliminates binding under heavy loads.
(based on 3 reviews)
of respondents would recommend this to a friend.
Reviewed by 3 customers
Displaying reviews 1-3
Back to top
(1 of 1 customers found this review helpful)
Works well on the first try, better on the second
from Oregon City, OR
See all my reviews
Comments about Motion Pro Crankcase Splitter:
This was the first time I needed to split cases. I usually take bottom ends to a mechanic, but had poor results recently so this time I decided to do my own. I had an RM125 and CR250 engine to split. I shopped around and decided on the Motion Pro splitter. On the first bike (RM125), it took a little while to figure out how to orient the arms, and which case bolt holes to use. However, after about 30 minutes the case was split and no screw driver was used! On the 250, it only took about 10 minutes and the center cases were apart. Next time, I'm betting on just a few minutes. There are no usage or assembly instructions, but the design is pretty easy to understand. Start with the tool level to the case's machined surface (where it splits), choose a bolt pattern that is as close to a equilateral triangle as possible, and screw slowly while tapping lightly on the case with a dead blow hammer. Pay attention to the tool and make sure it stays level to the case while it separates. To make it easy, you'll want a buddy to help out. For the price, I would expect some type of "best practice" for using the tool. If it had those instructions, I'd have given this a 5 of 5!
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Its a winner
Does the job well. Its is univervsal and can be use for fly wheel pully on some brands of bikes.Comes with so many differnt attachments.Only if it came with some kind of case to keep all together when not using.Its worth its money.
(0 of 1 customers found this review helpful)
Motorcycle Tools Collection
from Carson City, Nevada
The Case Splitter Tool Looks To Be Of Good Quality Craftsmanship And Comes With Usable Parts, It Looks Like It Will Do The Tasks Just Fine When I Am Ready To Restore 16 Motorcycle Engines On The Bench.
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Know the answer? Answer this question
Do you have a question about this product?
Specifications and Options