Specifications and Options
(based on 1 review)
Reviewed by 1 customer
Displaying review 1
Back to top
Simple yet effective
from Neenah, WI
See all my reviews
Comments about CMP Motorcycle/ATV Wheel Chocks:
Used for a Ninja 500. Easy to mount on a trailer using 1/4"x20 (coarse thread) 2" carriage bolts, a lock washer, and washer. After marking the 4 hole locations (approx. 5" x 6") and drilling holes in trailer, I drilled 5/16" partial holes from the trailer underside and hammered in 1/4" tee nuts below the trailer to create threaded areas w/in the plywood flooring. Small furring strips (1"x2"x8") were screwed into the underside of the trailer to prevent the tee nuts from falling out. The chock can now just be bolted down from inside the (borrowed) trailer whenever I need it, with no need to go below the trailer to attach bolts as the tee nuts serve as permanent bolts.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Know the answer? Answer this question
Do you have a question about this product?