Motion Pro Push-Pull Throttle Assembly for Mikuni Racing Carbs

A:

Thanks for your question! In order to insure proper fitment please give us a call 1-888-339-3888.

A:

Thanks for the question. I checked with Motion Pro and they do make that cable for your machine. Please let us know if there is anything else we can do for you by contacting us by email at Sales@bikebandit.com, Live Chat or by phone at 888-339-3888. We are more than happy to help.

A:

Thank you for your question. Typically the 4 stroke ATV and the Road bikes have a push and pull mechanism. This is a universal product and is made to fit a wide range of motorcycles. Some modification may be required and we cannot guarantee fitment.

A:

Good question! We unfortunately do not offer technical sizing specs on items. You might contact manufacture direct for technical sizing specs.

A:

Thank you for your question! That is a Universal product. As long as your carburetor is a Mikuni, you should not have any problems.

A:

Thanks for writing in to BikeBandit! Depending on if your machine has a push\/pull carb stock this would work with most stock push and pull carbs.

A:

Thanks for writing in! If your bike has a push\/pull throttle with mikuni carb\'s then yes it will work.

A:

Thanks for writing in to BikeBandit! Depending on if your machine has a push\/pull carb stock this would work with most stock push and pull carbs.

A:

Thanks for your question! This item is only for Mikuni racing carbs.

A:

Thanks for your question! If you do not have a Mikuni Racing Carb on your machine, this throttle assembly will not work for you. I have provided you with the motion Pro website below. You might try contacting them to see if they have a throttle assembly available for your machine.\nhttp:\/\/www.motionpro.com\/