Pro Taper SE Handlebars
-High-strength aerospace aluminum alloy rated at 70,000 psi ultimate strength
-1/4" cut guides for precise modification
-Printed position guides and model name on bar
-Knurled clutch side for secure grip hold
-Shot peened finish to increase fatigue life
-Full 5mm wall thickness for maximum strength
-7/8" outside diameter
Write a Review
- Durable Coating
- Great price
- Motorcycle Enthusiast
- Easy To Install
Hi There i have a Honda CRF230F 2005 and was wondering what Bar is the correct one to get for my bike, ( i dont know much about bikes ) Thank you.
Asked on 3/13/2013 by AzzaTyp from Australia, VIC
Thanks for your question! This bar will fit your machine. The bend you choose is up to you. Please feel free to give us a call if you have any questions 1-619-623-3661.
Answered on 3/14/2013 by Anonymous
I have a 2007 crf230f I want the jet black handle bars
But I have no idea what ones to order that will fit my bike
I want ones that closely resemble the original bars on it now.
Asked on 8/4/2012 by Kayla from Fort mcmurray, AB
Thank you for your question. Any of the CR style handlebars closely ressemble the factory bars. There is three available heights to customize the reach of the riders postion. Typically the CR mid bend is similar to the factory bend. Please call us for further assistance at 1-888-339-3888.
Answered on 8/9/2012 by Anonymous
Hi, I have a 09 KLX 250. Should I get the KLX/DRZ 110 Bars?
Asked on 4/23/2012 by Anonymous
Thank you for the question! If you have a 250 the 110 bend may be a little small for that application. Please copy and paste the link below to view the sizing chart for these bars:http://www.protaper.com/products/handlebars/se
Answered on 5/9/2012 by Anonymous
what should i get for my 400ex? I dont want to have an issue with the length of my cables.
Asked on 3/15/2012 by simplewill
Thanks for your question! You will need to measure the stock handlebars and compare it to the measurements for this handlebar.
Answered on 3/16/2012 by Anonymous
Bars for my 03' YZ250R. I would like something a bit taller than stock. 3/4-1" taller. Also, I have bark busters. Will they mount to these bars (7/8"")? Thanks
Asked on 3/2/2012 by Anonymous
Thanks for your question! These bars are 7/8" so they would mount. We do not list the specs from your original bars, so you will need to compare your original measurements, to the measurements listed in the dropdown options.
Answered on 3/5/2012 by Anonymous
What bend and bar for 2006 YZ85?
Asked on 10/3/2011 by Anonymous
Thanks for your question! You would pick the bend depending on what dimensions you were looking for or liked to run on your machine.
Answered on 10/4/2011 by Anonymous
What would be best for a KX-65----the school boy high or low? Thanks
Asked on 11/25/2010 by rusty nails from castle rock, colorado
Thanks for your question! Bar bends would not be going off what is best for the machine. The different bar bends would be for different rider preferences. You would need to check the dimensions and see which bend best suits your style or feel.
Answered on 12/7/2010 by Anonymous
What type will fit a 2009 crf150f. And some type that would be best for woods riding? THANKS
Asked on 9/21/2010 by Wheelie Joe from Olean,NY
Thanks for your question! The Pro Taper SE handlebars are their 7/8th inch line of handlebars. Any of the bars will fit your model, so it would depend on what type of bend you would like. Most riders will go with a medium to low bend for woods riding.
Answered on 9/23/2010 by Anonymous
What size bar do i need for a 2007 ktm 50 sx?
Asked on 6/8/2010 by Anonymous
Thanks for your question! Pro Taper SE Handlebars are also offered in the KTM50 bend, that would be the bend we suggest to run on your machine.
Answered on 6/16/2010 by Anonymous
Specifications and Options
|Bar Bend Type
||ATV High Bend, ATV Low Bend, ATV Mid Bend, Carmichael Bend, CR Hi Bend, CR Low Bend, CR Mid Bend, Factory Suzuki Bend, Henry/Reed Bend, Honda Mini Bend, Kawasaki Mini Bend, KLX/DRZ110 Bend, KTM 50 Bend, KX High Bend, KX Low Bend, Raptor ATV Sport Bend, RM High Bend, RM Low Bend, School Boy High (85cc) Bend, School Boy Low (85cc) Bend, School Boy Pro, Suzuki Mini Bend, Trails Mid Bend, Trials High Bend, Trials Low Bend, Windham/RM Mid Bend, XR50 Bend, Yamaha Mini Bend, YZ High Bend, YZ Low Bend
|Handlebar / Bar Pad Color
||Blue, Jet Black, Platinum Gray, Platinum Grey, Red, Silver
||102mm, 106mm, 108mm, 113mm, 117mm, 140mm, 143.2mm, 150mm, 160mm, 171mm, 67mm, 71mm, 74mm, 77.2mm, 77.9mm, 80mm, 82mm, 84mm, 87.9mm, 92mm, 94mm, 95mm, 99mm
||100mm, 44.4mm, 44.9mm, 44mm, 47mm, 49mm, 50mm, 51.5mm, 52mm, 54mm, 55mm, 56.4mm, 56mm, 57mm, 58mm, 60mm, 68mm, 70mm, 73mm, 76mm, 84mm, 86.5mm
||648mm, 715mm, 724mm, 730mm, 745mm, 770mm, 800mm, 813mm, 815mm, 825mm