Sidi, always the technology market leader is taking race
boots in an all new direction with the Mag-1. Combining
an innovative internal bracing system with well chosen
design elements and materials to create a very
lightweight, yet ultra protective race boot system.
The Mag-1 boot comes in at 4.4 pounds, over
14oz. or 17% lighter than the Vortice boot!
The rear upper is made in polyurethane, and is
assembled to the boot with two screws: one
on the outside under the TECNO-3 Magnetic
mechanism, the other on the inside which
holds the micrometric adjuster strap. The
screws support and block the internal support
system which is made with carbon fiber
beams, making up the frame of the boot. This
system allows excellent flex movement frontto-
back while being firm side-to-side.
An all new Micrometric Tecno-3 magnetic
closure mechanism is easy and quick to use
as well as being highly adjustable and light in
weight. The TECNO-3 Magnetic closures close
the boot with an extremely resistant steel
wire, that is hooked to the clip with the aid
of a magnet.
Arch and Achilles areas are covered with
Sidi’s exclusive elastic textile and injection
molded polyurethane comfort panels. The
arch area utilizes two TPU bands next to the
TECNO-3 Magnetic closures, for a maximum
support and wrap of the arches.
Asymmetric and shaped shock absorbing
heel cup, smooth and flat inside, for more
adherence with the bike, with shock
absorbing system in the back and outside.
The shell and the shock absorbing system
are replaceable through a screw and an
Nylon inner sole with removable arch
Dual compound sole.
Technomicro is used as a base material.
Double stitched in all high stress areas.
All bolt on parts (shin, heel, closures, toe
slider) are replaceable.
TPU toe shift pad.
Perforated Teflon treated nylon lining
in the boots upper with a soft and
comfortable Cambrelle lining used in
the toe area.
All screws that attach the various
technical parts are recessed so
as not to damage the bike.
The toe slider is made
in nylon reinforced with
fiberglass. It is fitted with a
new air intake and an innovative
The Mag-1 has a widely adjustable calf
area that can accommodate riders with
up to an 15-inch calf diameter 11.5-inches
above from the bottom of their heel. Features -Arch and Achilles areas are covered with Sidi’s exclusive elastic textile and injection molded polyurethane comfort panels -Arch area utilizes two TPU bands next to the TECNO-3 Magnetic closures, for a maximum support and wrap of the arches -Asymmetric and shaped shock absorbing heel cup, smooth and flat inside for more adherence with the bike, with shock absorbing system in the back and outside -The shell and the shock absorbing system are replaceable through a screw and an interlocking system -Nylon inner sole with removable arch support pad -Replicable external shin, heel and toe sliders -Replicable external shin, heel and toe sliders -Nylon inner sole -Dual compound sole -High stress areas are double stitched -TPU shift pad -Perforated, Teflon treated nylon inner lining with Cambrelle lining in the toe area -Recessed screws used to attach replaceable parts so as to not damage bike -Toe slider made from nylon reinforced with fiberglass -Toe Slider features new air intake and alloy insert -Adjustable calf can accommodate riders with up to an 15-inch calf diameter when measured 11.5-inches up from the bottom of the heel
Specifications and Options