Bully Locks Li'L Bully Locks features new lock design for added security for your motorcycle. The locks are made with specially heat-treated alloy steel to resist cutting. Includes pouch and 3 keys. Make sure to remove lock from brake disc prior to every motorcycle ride
-5.5 mm or 10mm disc lock for motorcycles
-Constructed with specially heat treated alloy steel to resist cutting
-Hardened anti-drill discs
-5.5 mm pin fits smaller discs vent holes
-Includes pouch and 3 keys (1 lighted)
-Remove lock from brake disc prior to every ride! Buy a Lock Disc Reminder too.
- Casual Rider, Motorcycle Enthusiast
- Easy To Use
- Motorcycle Enthusiast
Specifications and Options
|Cable Length / Lock Size
What size would fit for a Triumph America 2009? And, Is there any difference between this model and the Master one? Thanks, Ramiro.
Asked on 9/4/2012 by MagicCid from Mexico
Thank you for your question. This lock will fit most if not all the bike with a front or rear brake rotor. There is no real differance, the products compare equally.
Answered on 9/4/2012 by Anonymous
What size do I need to order for my 2008 KLR650? Thanks
Asked on 8/13/2012 by Sierra to Tierra from Truckee, CA
Thank you for your question. This lock is universal and is designed to fit the brake discs. The Li'l bully lock is 5.5mm in size.
Answered on 8/14/2012 by Anonymous
My bike is a 2004 BMW R1150RT...i'm not sure which size I need? Can you tell me or at least tell me what to measure? Thanks!
Asked on 6/13/2010 by Rex from Alpharetta, GA
Thanks for your question! When ordering the Bully Lock Li'L Bully Lock you would want to go with a 10mm sized lock.
Answered on 6/17/2010 by Anonymous
What size do I need for a Kawi '04 zx-6r? Thanks.
Asked on 6/4/2010 by Anonymous
Thanks for your question! In order to get the proper sized Bully Lock Li'L Bully Lock you would need to get the 10mm version.
Answered on 6/13/2010 by Anonymous
which one fits on a ex500... 5.5 or 10mm?
Asked on 8/30/2009 by loganzx2 from Washington
Thanks for your question! With the information your looking for unfortunately this will vary per machine, the manufacturers will not provide this information to us. You would need to check your manual or measure the actual hole.
Answered on 8/31/2009 by SalesDepartment