To find the parts that fit your machine, click on the link below and select your make, year and model.
Only the products that fit your machine will be shown in the product list
Click Here to Add Your Machine! >>
Slipstreamer's dynamic sculptured styling enhances the appearance of your motorcycle without affecting its lines. The Enterprise S-00 windshield has a four-point, fully adjustable, anodized aluminum ball and socket mount, a two-piece lower fork-tube clamp to provide stability, and longer lowers for added protection against weather and road hazards. It also has a cushioned headlight seal for round and square headlights. Provided with 7/8" mounting hardware. Please Note: Some machines will need additional hardware. Please see if note is attached to your machine once entered. Please use the optional hardware kit link below for additional mounting kits. It measures 21-1/2"H x 35-1/2"W (Hands) x 19"W (Body).
Optional Hardware Kits
(based on 10 reviews)
of respondents would recommend this to a friend.
Reviewed by 10 customers
Displaying reviews 1-4
Back to top
Previous | Next »
(5 of 6 customers found this review helpful)
Easy to install, works great
from Boise, ID
Comments about Slipstreamer S-00 Enterprise Windshield:
My wife rides a Honda 450 Nighthawk. Unfortunately, the first windscreen I installed offered no hand protection and produced significant helmet buffeting above 25mph. Trips in anything but warm weather were too cold for her and the noise and helmet shaking stole much of the pleasure. Clearly, I needed to find something better for her.After a hassle free ordering process, the well packaged S-00 windscreen arrived in less than a week. I found all the parts included and clear instructions.The installation took about an hour because I tested a couple different positions for the fork mounts. However, any subsequent removal or re-installation could probably be done in 10 or 15 minutes. The windscreen fit as advertised and looks like it was designed for this bike.My test run revealed that the buffeting completely disappeared and even at 60mph there was little air blast over the hand grips. The ride was also much quieter. The windscreen itself appears solid yet doesn't seem to produce too much drag for a 450cc engine. However, I need to do further tests to determine its total affect on performance and fuel economy.A smooth purchase experience, quick delivery, easy installation and good function merit a 5 star rating in my book.
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
(4 of 4 customers found this review helpful)
Great Value For The Money
from Spencer, Wis.
My Bike Came with a similar windshield when I bought it & was in need of replacement. I chose this product, because it was darn close to what I had on it. Al little tricky to install, but patience played in a successful installation. Be sure you indicate your handlebar size when ordering to be on the safe side, as I had to send my clamps back to the manufacturer to get ones for larger diamater handlebars. Windshield does exactly what it should & provides excellent coverage.Have had on bike for a bit over 2 years, & am pleased with its functionability. I did have to use additional material around the lower fork clamps to get a tighter fit so they would stay in one place. On the cooler days, it would be nice to have a means to close the large open gap I have around My headlight. I did have to file down the sides a bit to create a gap, as shield was tight against upper part of forks & had an anoying squeak going over bad road bumps. Take care & pre-soak when cleaning, reduces risk of scratching - a soap/water mix in a spray bottle helps considerably - especially for cleaning bugs off the surface. The best proof of how well this product gave coverage to both bike & rider came last week when I came in contact with a deer from the right side. The shield protected Me & the bike from serious injury/damage. The lower part of the shield got broken & the turn signal got damaged, was all that the bike suffered in damage. Myself, am fine & am glad I had this shield on the bike - If I had not, I feel the bike would have got tipped & damaged severly from being tipped over & myself injured as well - for the most part, the shield took the impact. I've ordered the same replacement shield for it again - I'm SOLD on this product!!!!
Images shared by Lethal3
1986 Suzuki VS700 Intruder
Tags: Using Product, Picture of Product
(1 of 1 customers found this review helpful)
Excellent fit, easy installation, nice performance on the road...
I recommend BikeBandit !
By mike & mandy q
from fargo nd
See all my reviews
I ordered a S-00 Enterprise windshield for my wifes CX-650 Honda. It fits perfect and adds lines to it's appearance. The sales team recommended this model for the bike and they were right! BikeBandit is the place to shop!
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Know the answer? Answer this question
Do you have a question about this product?
Specifications and Options
Connect with Us