Shop by Your Machine

Mikuni Flat Side TM Series 4-Stroke Carburetors

5.0 (2 reviews)
Mikuni
Regular: $310.95 - $369.95 Save 10%!
Sale: $279.95 - $332.95
Free Shipping Free Shipping! Bandit Bucks

Spigot Mount

40mm
43mm

Bore Size

33mm
36mm

Specifications and Options

Brand Mikuni
Bore Size -
Spigot Mount -
Main Jet -
Jet Needle -
Needle Jet -
Throttle Valve -
Pilot Jet -
Note: This item is a universal/custom fit component, and is not a direct fitment for your machine. These parts may require modification and we recommend installation by a certified mechanic. Please have machine specifications ready when you call.
 



Email Me
Thank you for your interest!
You will be contacted when this product becomes available.

Quantity

- +
Item(s) added to cart.
Best Price Guarantee
Lowest Price Guarantee
If you find a lower price, we'll match it -- Details
Please make a selection above.

Product Details




   Features
  • Significant performance improvements over older round slide carbs
  • Flat slide design helps create a smooth bore effect, increasing air flow
  • Great throttle response because of more precise fuel metering
  • All are center-pull style throttle, unless noted by footnote
  • Jetting may need to be changed per application; see chart for included jetting
  • Use geniune Mikuni jets and parts for best results
  • Smooth-bore reduces turbulence in carb throat for better throttle response & power delivery
  • Square-type slide carburetors have increased air-flow metering at low engine speeds
  • Provisions to install power jet included on 38mm
  • TM series bodies accept Power Jet Kits, which prevents leaning out during extended full-throttle running.
  • Sold each
  • Made in Japan

Specifications and Options

Brand Mikuni
Bore Size 33mm, 36mm
Spigot Mount 40mm, 43mm
Main Jet 127.5, 130
Jet Needle 5FP96, 9DZH6-50
Needle Jet 784-24111 P-8, T84-13002 P-8
Throttle Valve 1.5, N/A
Pilot Jet 12.5, 37.5

Q & A

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 33 questions Browse 33 questions and 34 answers
Why did you choose this?
BikeBandit Store
I picked the carb because the one that is on the bike has been having the same problem for a few year so I'm just putting a new one on.
Terry on Aug 22, 2018
I picked the carb because the one that is on the bike has been having the same problem for a few year so I'm just putting a new one on.
Terry on Aug 22, 2018
I have a 1990 suzuki dr350s (kick start)motorcycle. Will this carb just hook up, or do I have to modify some things, and if so what mods.
rv on Nov 21, 2012
BEST ANSWER: Thank you for your question. This carb will fit the DR350. You may need to have the carb re-jetted to comply with the Suzuki fuel system demands. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone toll free at 888-339-3888. We are more than happy to help.
Will this carburetor fit my 1976 Yamaha XT500?
A shopper on Jul 27, 2018
BEST ANSWER: Thank you for your question! You can definitely make this carb fit your 1976 Yamaha XT500 but you'll have to do some modifying as this is a universal carb and not a machine specific carb. To see if this will work for you please measure the bore size, mounting sizes along with the type of carb needed for your machine (flat slide, round slide, etc.)Unfortunately we are not provided with any carburetor size specifications. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone at 888-339-3888. We are more than happy to help.
Will this fit my 1999 Yamaha Kodiak 400 4x4?
adam s on Jun 7, 2019
BEST ANSWER: Hello Adam, please measure the spigot mount and bores size of your OEM carb, this size will be the size you need to order. This is a different type of carb so some modifications will be needed for proper operation. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone toll-free at 1-888-339-3888. We are always more than happy to help.
I have a Grey Import 1989 ninja 250 will these carbies mount straight on? I need mainly without change a functional needle jet
Nathan B on Sep 11, 2019
BEST ANSWER: Nathan, thank you for the question. Unfortunately we do not have any specs in regards to the carburetor set up on a 1989 Ninja 250 other than the diagram itself. The general shape and mounting points seem similar but you would need to determine the spigot mount and bore size for guaranteed direct fitment. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone toll-free at 1-888-339-3888. We are always more than happy to help.
Will this carburetor fit my 1987 Yamaha tw 200 trailway?
A shopper on Sep 3, 2019
BEST ANSWER: Thank you for the question. To see if this carb will work for you please measure the bore size, mounting sizes and identify the type of carb needed for your machine (flat slide, round slide, etc.). We cannot guarantee you direct fitment, some modifications may be required as it is not a direct OEM replacement. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone toll-free at 1-888-339-3888. We are always more than happy to help.
Will this carburetor fit a 1978 Suzuki SP370?
Zack K on Aug 11, 2019
BEST ANSWER: Zack, thank you for the question. This is a universal carb and is made to fit a wide variety of machines. Unfortunately I cannot guarantee you fitment without modification. I would recommend measuring the bore size and mounting sizes on your current carb, as well as checking if your machines requires flat side, round side, etc. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone toll-free at 1-888-339-3888. We are always more than happy to help.
Will this fit a 1982 cm450e?and if not can you tell me which ones will.
Steven M on Aug 2, 2019
BEST ANSWER: Thank you for your question! This carburetor was intended for a machine with a single carburetor. Your 1982 Honda CM450e originally came with a dual carb set up. In order for this carb to proper work, you will need to run two carburetors side by side with some type of custom cable that will operate both carbs. You might also be able to get away with running one carb but a custom flange will be needed. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone toll-free at 1-888-339-3888. We are always more than happy to help.
Will this fit my 1986 TT350?
David B on Jul 25, 2019
BEST ANSWER: David, thank you for the question. This is a universal product and is made to fit a wide range of machines. Some modification may be required and we cannot guarantee fitment. To see if this part will work for you please measure the bore size, mounting sizes along with the type of carb needed for your machine (flat slide, round slide, etc.)Unfortunately we are not provided with any carburetor size specifications. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone at 888-339-3888. We are more than happy to help.
Mikuni carb showing will it fit 1300 Honda VTX C 2006 ??? Thanks
Stephen B on Jul 24, 2019
BEST ANSWER: Stephen, thank you for the question. When comparing the OE carb to this Mikuni Flat side, I noticed they were slightly different in design. In order for the Mikuni to work on your 2006 Honda VTX1300C, you will need to block off some vacuum lines that were used by the OE carb. Remember, these are universal carbs made to fit a wide variety of machines, so modification is required more often times than not. It will not be a direct fit, but should be able to work with proper modification. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone toll-free at 1-888-339-3888. We are always more than happy to help.
will this fit Yamaha xz550 vision?
A shopper on Jul 14, 2019
BEST ANSWER: Thank you for the question. The Mikuni Flat Side TM Series 4 Stroke carburetor is a universal product and is made to fit a wide range of machines. Some modification may be required and we cannot guarantee fitment on your Yamaha XZ550 Vision. To see if this part will work for you please measure the bore size, mounting sizes along with the type of carb needed for your machine (flat slide, round slide, etc.)Unfortunately we are not provided with any carburetor size specifications. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone at 888-339-3888. We are more than happy to help.
Is this a bolt on application? Does throttle cable hook up?
A shopper on Jun 30, 2019
BEST ANSWER: Thank you for the question. This is a universal product and is made to fit a wide range of machines. Some modification may be required and we cannot guarantee fitment. To see if this part will work for you please measure the bore size, mounting sizes along with the type of carb needed for your machine (flat slide, round slide, etc.)Unfortunately we are not provided with any carburetor size specifications. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone at 888-339-3888. We are more than happy to help.
will this fit my 2006 honda trx450er?
A shopper on Jun 26, 2019
BEST ANSWER: Thank you for the question. This is a universal product and is made to fit a wide range of machines. Some modification may be required and we cannot guarantee fitment. To see if this part will work for you please measure the bore size, mounting sizes along with the type of carb needed for your machine (flat slide, round slide, etc.)Unfortunately we are not provided with any carburetor size specifications. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone at 888-339-3888. We are more than happy to help.
I have a 1993 Mitsubishi mini truck..660cc 3 cylinder 4 stroke . It has a mikuni side draft butterfly carb. Will this carb work as a replacement?
A shopper on Jun 19, 2019
BEST ANSWER: Thank you for your question! Unfortunately, we do not have any specs on the 1993 Mitsubishi mini truck so we cannot verify if this will or will not work with your truck. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone toll-free at 1-888-339-3888. We are always more than happy to help.
Will it fit 2014 dr650se?
A shopper on Jun 18, 2019
BEST ANSWER: Thank you for the question. The Mikuni Flat Side TM Series 4 Stroke Carburetor is a universal product and is made to fit a wide range of machines. Some modification may be required and we cannot guarantee fitment on your 2014 DR650SE. To see if this part will work for you please measure the bore size, mounting sizes along with the type of carb needed for your machine (flat slide, round slide, etc.) Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone at 888-339-3888. We are more than happy to help.
I HAVE A 81 XL 500 AND WAN,T TO KNOW IF THE 36MM WILL FIT IT AND GIVE IT MORE PERFORMANCE ?
A shopper on May 13, 2019
BEST ANSWER: Thank you for the question. The Mikuni Flat Side TM Series 4-stroke Carberators are designed to fit a wide variety of machines. Unfortunately, we cannot guarantee you direct fitment without modification. We recommend installation with a certified mechanic for the best fitment. Performance wise, this might help boost it with the right specs. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone toll-free at 1-888-339-3888. We are always more than happy to help.
Will this carb work on my 1992 Suzuki DR250S?
red c on May 12, 2019
BEST ANSWER: Thank you for the question. This is a universal product and is made to fit a wide range of machines. Some modification may be required and we cannot guarantee you fitment on your 1992 Suzuki DR250S. To see if this part will work for you please measure the bore size, mounting sizes along with the type of carb needed for your machine (flat slide, round slide, etc.)Unfortunately we are not provided with any carburetor size specifications. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone at 888-339-3888. We are more than happy to help.
Will this fit a 1986 Honda trx 350 FourTrax ?
Michael H on Apr 15, 2019
BEST ANSWER: Michael, thank you for the question! The Mikuni Flat Side TM Series 4-Stroke Carburetors are a universal component made to fit a wide variety of machines. We cannot guarantee direct fitment without modification. We recommend installation by a certified mechanic. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone toll-free at 1-888-339-3888. We are always more than happy to help.
Will 4 of these fit on 82 honda nighthawk 650?
A shopper on Mar 3, 2019
BEST ANSWER: Thanks for the question! To better assist you, please give us a call toll-free at 1-888-339-3888. We are always more than happy to help.
Hola, hacen envios a Uruguay? Por cual medio? Cuales formas de pago tienen?
Bruno Z on Feb 5, 2019
BEST ANSWER: Gracias por su pregunta Bruno! Desafortunadamente no enviamos para Uruguay, las formas de pagos que aceptamos son American Express, Discover, MasterCard, Visa, i PayPal. Por favor, háganos saber si hay algo más que podamos hacer por usted por correo electrónico a [email protected], o por teléfono al número gratuito 1-888-339-3888. Estamos más que encantados de ayudarle.
Will this fit a 2004 Kawasaki vn1500?
A shopper on Feb 3, 2019
BEST ANSWER: Thank you for the question. This is a universal product and is made to fit a wide range of machines. Some modification may be required and we cannot guarantee fitment. To see if this part will work for you please measure the bore size, mounting sizes along with the type of carb needed for your machine (flat slide, round slide, etc.). The VN1500 OEM carb requires vacuum lines as this carb does not, if all fits these lines would need to caped and sealed. Unfortunately we are not provided with any carburetor size specifications. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone at 888-339-3888. We are more than happy to help.
Will this fit my 2007 honda trx400?
A shopper on Nov 13, 2018
BEST ANSWER: Thank you for your question! Measure the spigot and bore mounting on your TRX and compare it to the sizes shown on the product page, if the measurements match up you can make this carb work for your ATV. Please keep in mind since this is a universal carb you will have to modify a few things to make it work properly. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone toll free at 1-888-339-3888. We are always more than happy to help.
Will this carb work on a 2006 yamaha yfz450?
Jeffery F on Oct 10, 2018
BEST ANSWER: Thank you for the question. This is a universal product and is made to fit a wide range of machines. Some modification may be required and we cannot guarantee fitment. To see if this part will work for you please measure the bore size, mounting sizes along with the type of carb needed for your machine (flat slide, round slide, etc.)Unfortunately we are not provided with any carburetor size specifications. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone at 888-339-3888. We are more than happy to help.
Would this carb work on my 94 suzuki DR350SE electric start?
A shopper on Oct 4, 2018
BEST ANSWER: Looks like this would fit your 94 Suzuki DR350se, please be sure to measure the spigot and bore for correct fitment. Also since this is a universal carb that is not machine specific there is a chance you may have to modify your bike to accept this carb. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone toll free at 1-888-339-3888. We are always more than happy to help.
Will these carbs work on my 78 gs750?
Cory E on Aug 18, 2018
BEST ANSWER: Thank you for the question. This is a universal product and is made to fit a wide range of machines. Some modification may be required and we cannot guarantee fitment. To see if this part will work for you please measure the bore size, mounting sizes along with the type of carb needed for your machine (flat slide, round slide, etc.)Unfortunately we are not provided with any carburetor size specifications. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone at 888-339-3888. We are more than happy to help.
Will this fit a 1982 Yamaha XJ650?
A shopper on Aug 10, 2018
BEST ANSWER: Thank you for the question. This is a universal product and is made to fit a wide range of machines. Some modification may be required and we cannot guarantee fitment. To see if this part will work for you please measure the bore size, mounting sizes along with the type of carb needed for your machine (flat slide, round slide, etc.)Unfortunately we are not provided with any carburetor size specifications. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone at 888-339-3888. We are more than happy to help.
will this fit on my 1982 suzuki sp500?
A shopper on Aug 6, 2018
BEST ANSWER: Thanks for the question! Unfortunately the Mikuni Flat Side TM Series 4-Stroke Carburetor will not work with your 1982 Suzuki SP500, you will need a Mikuni 40mm CV carburetor. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone toll free at 1-888-339-3888. We are always more than happy to help.
Will this carb work on my 1998 klx300r?
Ben K on Aug 5, 2018
BEST ANSWER: Thank you for the question. This is a universal product and is made to fit a wide range of machines. Some modification may be required to your 1998 Kawasaki KLX300 and we cannot guarantee fitment. To see if this part will work for you please measure the bore size, mounting sizes along with the type of carb needed for your machine (flat slide, round slide, etc.)Unfortunately we are not provided with any carburetor size specifications. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone at 888-339-3888. We are more than happy to help.
I have a 2004 husqvarna TE510 100 anniversary edition wondering if this carburetor would work for my bike? And how hard it would be to put it on? From the factory it has a mikuni Carburetor.
Earl B on Aug 2, 2018
BEST ANSWER: Hello Earl, this is a universal product and is made to fit a wide range of machines. Some modification may be required and we cannot guarantee fitment. To see if this part will work on your 2004 Husqvarna TE510 please measure the bore size, mounting sizes along with the type of carb needed for your machine (flat slide, round slide, etc.)Unfortunately we are not provided with any carburetor size specifications for your bike. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone at 888-339-3888. We are more than happy to help.
I have a 1975 Honda XL175, will this carb fit? Of not is there a part number that will be a direct replacement/ minor upgrade?
shane G on Jul 28, 2018
BEST ANSWER: Thank you for the question. This is a universal product and is made to fit a wide range of machines. Some modification may be required and we cannot guarantee fitment. To see if this part will work for you please measure the bore size, mounting sizes along with the type of carb needed for your machine (flat slide, round slide, etc.)Unfortunately we are not provided with any carburetor size specifications. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone at 888-339-3888. We are more than happy to help.
Will this carburetor fit my 1976 Yamaha XT500?
Isaac P on Jul 27, 2018
BEST ANSWER: Hello Isaac, you can definitely make this carb fit your 1976 Yamaha XT500 but you'll have to do some modifying as this is a universal carb and not a machine specific carb. To see if this will work for you please measure the bore size, mounting sizes along with the type of carb needed for your machine (flat slide, round slide, etc.)Unfortunately we are not provided with any carburetor size specifications. Please let us know if there is anything else we can do for you by contacting us by email at [email protected], Live Chat or by phone at 888-339-3888. We are more than happy to help.

Reviews

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Would you recommend
Yes (2)
Would you recommend
Yes
Carb
This carb works great on the DR350
September 14, 2018
Purchased
1 year ago
Would you recommend
Yes
love it
works good on my ft500 Honda ascot
May 17, 2017
Purchased
over 2 years ago
Rider Reviews - Summary
Overall Review:
5.0
Write a Review
Back to Top