Facebook link

Items with “Shipping Insanity” badge may qualify for complimentary next day air shipping.

Keep an eye out for the ‘Shipping Insanity’ badge on select products the next time you order! These specific products in orders over $99 will be eligible for next-day air shipping at no extra cost. If the order contains eligible items but is under $99, you will still pay ground shipping but will receive a complimentary upgrade to next-day air.

*Please Note: ‘Shipping Insanity’ is for eligible items only, not the entire order. ‘Shipping Insanity’ does not apply to items being shipped outside of the Continental US, to PO Boxes, or military addresses. Items will automatically ship regular ground if restrictions apply.

WHAT TO LOOK FOR

Abus Granit X Plus 8008 Brake Disc Lock and Chain

The ABUS XPlus 8008 detects any movement via the ABUS 3-D detection system. The XPlus cylinder offers the highest protection against manipulations, e.g. picking up or falling over. Sends out different acoustic signals to inform about battery, activation and alarm status. Lock can be transported in locked condition without activating detection system thanks to automatic brake disc recognition system.

SPECIFICATIONS

  • Made from heavy-duty, special hardened steel
  • 16mm steel bolt
  • Alarm of at least 100dB

K&L Fat Jack Center Jack

Everything you like about the MC450 and more. Fat Jack’s wider deck with rubber non-skid pad increases your lifting area for increased stability.

*Do not use air/impact guns to raise and lower the MC455

SPECIFICATIONS

  • UPS shippable
  • Minimum Height: 3-1/2″
  • Maximum Height: 13″
  • Dimensions: 16″ (405mm) L x 10″ (255mm) W
  • Base Width: 14″ (355mm)

Air Force Blaster Motorcycle Dryer BC-CD

8hp dryer unit on wheels with 12 ft. grounded cord. Five different nozzles enable users to position air flow where desired and eliminate water spots.

SPECIFICATIONS

  • All steel construction
  • 10 ft. heavy-duty hose, heavy-duty Neoprene® blower nozzle, air concentrator
  • Two twin-fan 4hp motors for a total of 8hp that deliver up to 58,500 fpm of clean, filtered, warm air
  • Two switches allow users to set the air flow and temperature at three different levels
  • Use either motor independently or both simultaneously for maximum power
  • Air stream tool, microadaptor, 1-1/4″ adaptor and easy change foam filter
  • Great for water-traps
  • One-year manufacturer’s warranty
  • Made in USA

BikeMaster Carburetor Synchronizing Kit

A must-have tool for keeping your carbureted bike running smoothly. The Carburetor Synchronizing Kit from BikeMaster® works with 2-, 3- or 4-cylinder motors. The kit features 2″ diameter gauges fitted with a lockable damping valve to even out the pulses for accurate readings.

SPECIFICATIONS

  • Includes four gauges, hoses, adaptors, mounting plate and a durable carrying case
  • Gauges are calibrated to 0-30″/Hg vacuum

National Cycle Cruiseline Hard Saddlebags

Hard bags, though practical, need to look good on your cruiser. National Cycle achieves a tight fit with good looks in the styling of Cruiseliner™ Saddlebags. Easy-to-use, quarter-turn fasteners for no-tool removal of the saddlebags from the frame. Permanently attached lids are hinged in the front and swing forward for easy access to the interior. 1-1/4″ tight-fitting seals conform to the shape of the lid to keep the elements out. A keyed push-button lock is recessed into the lid. National Cycle saddlebags are custom engineered for each motorcycle to exact specifications and are guaranteed to fit.

SPECIFICATIONS

  • For cruisers with no turn signal interference: Smooth Back Saddlebags
  • With recessed pockets for stock turn signals: Pocket Back Saddlebags
  • Cruiseliners™ are painted gloss black and ready to mount or custom paint
  • Bags and mount kits sold separately
  • Mount kits include saddlebag mount frames, hardware and instructions

Firstgear Torrent Waterproof Duffel Bag

Firstgear® waterproof luggage was created to provide protection for all your valuables. Tough PVC tarpaulin fabrics are precision-cut and sonically welded to ensure optimal seam integrity, strength and durability for the rigors of the road, on and off. Designed and developed for motorcycle riders and extensively tested over thousands of miles and a variety of terrains. Firstgear luggage will get you there and back again.

SPECIFICATIONS

  • PVC tarpaulin fabric is tough, durable and long-lasting
  • Sonically welded seams ensure true waterproof integrity
  • Strategically placed D-rings, handles and webbing straps for easy attachment to your machine
  • Multiple sizes and capacities to accommodate every rider
  • Includes webbing straps
  • Manufacturer’s limited lifetime warranty
  • 25 liter: 19″L x 12″W x 12″H
  • 40 liter: 24″L x 12″W x 12″H
  • 70 liter: 28″L x 14″W x 14″H

Dragonfire Racing Sidekick Mini Venture Bag

Constructed from durable, 600-denier polyester with water-resistant liner, rigid walls and safety reflective trim. The Sidekick Mini Venture Bag includes heavy-duty zippers and mounting straps to carry all the necessities for hunting, fishing or a day on the trails. A large storage compartment allows you to pack enough food to feed the crew and the zig-zag shock cord allows even more storage on top. Mounting is simple, attaches with four twist-lock mounting clips to complete installation in a matter of minutes.

SPECIFICATIONS

  • Side detachable, water-resistant insulated cooler with shoulder strap
  • Safety reflective trim makes it easy to spot at night
  • Ideal for use in smaller bed/storage areas like the RZR
  • Dimensions: 23”L x 14”W x 11”H
  • Main compartment: 14″L x 14″W x 12″H
  • Sidekick: 7″L x 14″W x 10″H

USWE Outlander 2L Pack

Hydration capacity available in 2, 4, or 9 liters, the Outlander by USWE will keep you going well after you have left camp. It’s slim profile, Shape-Shift™ bladder, and 4-point harness, make this pack a favorite amongst athletes.

SPECIFICATIONS

  • Race Suspension – NDM™ technology
  • 4-Point stretch harness
  • Ergonomic shoulder and chest straps
  • 100% bounce free in action

Answer Elite Ops Jersey

Performance-first gear that holds up to impacts with brush, branches, earth and stone. Most riders wear motocross gear on the trail for one reason – it’s comfortable. Our all-new off-road gear is as lightweight and unrestrictive as our top of the line Trinity MX gear, but features strategically added materials in key areas for increased durability. We’ve also included off-road specific convenience features, and a stealthy look that keeps you low profile when you’re connecting trails and stopping for gas. Answer’s same great 2020 MX line fit keeps you comfortable whether you’re covering ground quickly or fighting through the impossible.

SPECIFICATIONS

  • Waffle knit polyester main fabric
  • Sleek no-sew collar
  • Athletic set in sleeve pattern and vented side panels
  • Durable Ripstop sleeves with perforated stretch cuffs

Gaerne Youth GXJ Boots

Premium boot designed specifically for junior riders, future motocross champions. Made in Italy from high-quality materials, the Youth GX-J Boot offers protection and an instant step-in comfort. Structural support consists of two lugs that slide inside designated pockets, avoiding front and rear overextension while providing flex forwards and backwards. Stamped suede on the upper side increases grip against the bike and heat resistance. High-grip, rubber compound sole grants durability, superior grip and perfect feeling while riding.

SPECIFICATIONS

  • Anti-torsion lugs
  • Internal toe and heel reinforcement for enhanced protection
  • Four light-alloy, replaceable buckles for easy, fast and precise closure
  • Adjustable upper buckles to accommodate knee braces or larger calves

Mobius X8 Wrist Brace

The X8 Wrist Brace incorporates the Continuous Cable Routing System (CCRS), Mobius’ innovative patent-pending technology, which provides maximum support across the wrist joint, allows more mobility and progressively resists hyperextension, minimizing the risk of injury to ligaments and bones. The unique design dynamically changes the tension in the cable throughout the wrist’s full range of motion preventing excessive bending (lateral and medial) and hyperextension. The tension adjustment screw limits extension from 10-70 degrees to achieve the desired support. The innovative CCRS design crosses the wrist joint both longitudinally and transversely. The tension in the CCRS progressively tightens keeping the wrist joint tight, resisting hyperextension and reinforcing the ligaments inside the wrist. The CCRS pulls the brace structure together preventing the brace from moving on the wrist. There is virtually no migration with the Mobius brace. This new brace technology works so much better than conventional braces that you can feel the brace working. Fully lined with comfortable EVA foam, its unique palm-free design provides an uninhibited and unrestricted grip.

SPECIFICATIONS

  • Symmetrical design allows the brace to be used on right or left wrist
  • Includes one wrist brace and an optional Tendon Back Plate pad for a precise fit

Answer Women’s A21 AR1 Swish Gloves

The AR1 series glove has premium stretch fabric panels, which allow movement with minimal restriction while providing superior comfort.

SPECIFICATIONS

  • Multiple stretch fabrics optimize fit/comfort
  • Velcro wrist closure
  • Durable synthetic leather palm support
  • Amara #2 thumb guard construction
  • Silicone index/middle finger ‘grippers’
  • Lightweight/fade-resistant backhand graphics
0 0 vote
Article Rating
Back to Top